Mandalaa Mini Breadboard-Friendly USB Nano V3.0 Atmega328 5V Micro-Controller Board Voltage Regulator for Arduino-Compatible

Mandalaa Mini Breadboard-Friendly USB Nano V3.0 Atmega328 5V Micro-Controller Board Voltage Regulator for Arduino-Compatible: Computers & Accessories. Mandalaa Mini Breadboard-Friendly USB Nano V3.0 Atmega328 5V Micro-Controller Board Voltage Regulator for Arduino-Compatible: Computers & Accessories. ❉The duino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (duino Nano 3.0) . It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. 。 ❉The duino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. 。 ❉The CH340G chip on the Nano is only powered if the board is being powered over USB. As a result, when running on external (non-USB) power, the 3.3V output (which is supplied by the FTDI chip) is not available and the RX and TX LEDs will flicker if digital pins 0 or 1 are high. 。 Features:。The duino Nano is a small, complete, and breadboard-friendly board based on the ATmega32 (duino Nano 3.0) . It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.。The duino Nano can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.。The CH340G chip on the Nano is only powered if the board is being powered over USB. As a result, when running on external (non-USB) power, the 3.3V output (which is supplied by the FTDI chip) is not available and the RX and TX LEDs will flicker if digital pins 0 or 1 are high.。Descriptions: 。Type: with needle, without needle。Condition: New。Microcontroller:Atmel ATmega32。Operating Voltage (logic level):5 V。Input Voltage (recommended):7-12 V。Input Voltage (limits):6-20 V。Digital I/O Pins:14 (of which 6 provide PWM output)。Analog Input Pins:。DC Current per I/O Pin:40 mA。Flash Memory:32 KB (ATmega32) of which 2 KB used by bootloader。SRAM:2 KB (ATmega32)。EEPROM:1 KB (ATmega32)。Clock Speed:16 MHz。Specifications:。Dimensions: 42*17* mm。Cable Length:about 235mm。Color: blue。Packing Content:。1 x Nano V3.0 ATmega32P。Notes:。Accessories resistance has mixed color phenomenon. Please know it. Thank You! 。 。 。 。 。

Mandalaa Mini Breadboard-Friendly USB Nano V3.0 Atmega328 5V Micro-Controller Board Voltage Regulator for Arduino-Compatible
Mandalaa Mini Breadboard-Friendly USB Nano V3.0 Atmega328 5V Micro-Controller Board Voltage Regulator for Arduino-Compatible
Mandalaa Mini Breadboard-Friendly USB Nano V3.0 Atmega328 5V Micro-Controller Board Voltage Regulator for Arduino-Compatible
Mandalaa Mini Breadboard-Friendly USB Nano V3.0 Atmega328 5V Micro-Controller Board Voltage Regulator for Arduino-Compatible